Sephia GS Sedan L4-1.8L (1997)
Brake Shoe: Service and Repair
REMOVAL
1. Remove the brake drum.
2. Remove the top return spring.
3. Remove the front and rear shoe spring clip and hold down pins.
4. Remove the anti-rattle spring and adjuster spring.
5. Note the position of the operating lever while holding the front shoe, then remove the bottom return spring.
6. Disconnect the parking brake cable from the rear shoe by removing clip and washer.
7. Remove leading and trailing brake shoes.
8. Clean parts with brake vacuum or solvent and inspect all parts for wear or damage. Replace as necessary.
INSTALLATION
1. Using white brake grease, sparingly lubricate all brake shoe contact points:
