Sephia GS Sedan L4-1.8L (1997)
Brake Master Cylinder: Service and Repair
With ABS
CAUTION: Do not allow brake fluid to contact painted surfaces. If it does, rinse with water and wipe off immediately.
REMOVAL
Remove in the order shown in the figure, noting the following:
-
Disconnect the brake lines from the master cylinder with a flare nut wrench.
INSTALLATION
Install in the reverse order of removal, noting the following:
-
Tighten the mounting nuts to 20 Nm (15 ft. lbs.).
-
Tighten the brake line flare nuts to 13-22 Nm (9-16 ft. lbs.).
-
Add brake fluid, bleed brakes and check for fluid leakage.