Sephia GS Sedan L4-1.8L (1997)
5.
Remove the A/C compressor manifold mounting bolt then remove the A/C compressor manifold.
6.
Using a pick tool, remove and discard the two (2) 0-rings from the top of the A/C compressor.
CAUTION
Do not allow any debris to fall into the A/C compressor.
7.
Lubricate the two (2) new 0-rings with the specified PAG oil and install them into the grooves in the top of the A/C compressor.
* NOTICE
The two (2) 0-rings are identical.
CAUTION
Do not allow any debris to fall into the A/C compressor.
8.
Install the new A/C compressor manifold using the existing A/C compressor manifold mounting bolt.
Tightening Torque: 17 - 23 ft-lb.