Sephia GS Sedan L4-1.8L (1997)
WARRANTY CLAIM INFORMATION:
Replacement Procedure
1.
Remove fuel filler cap to relieve any pressure in the fuel tank.
2.
Remove rear seat bottom cushion by pushing the 2 cushion release buttons located under the front edge of the seat.
3.
Disconnect electrical connectors (C304 and C399).
4.
Start engine and let it run out of fuel, turn off ignition.
5.
Remove fuel pump access cover and gently pull wire harness and grommet through the hole in the access cover.
6.
Disconnect and plug fuel hoses (mark hoses for correct reinstallation).
