Sephia GS Sedan L4-1.8L (1997)
PARTS LIST:
REQUIRED TOOLS:
^
Vapor Hose Assembly
^
3/8" Drive Rachet
(0K2YT 74 91X)
^
Vent Hose - Fuel Tank
^
3/8" Drive 10" Extension
Pressure Sensor (0K29T 42 548C)
^
Mounting Bracket - Fuel Tank
^
Pliers
Pressure Sensor (0K29T 18 215)
^
Foot-Pound Torque Wrench
^
14 mm Socket
^
10 mm Socket
REPLACEMENT PROCEDURE:
1.
Carefully lower the fuel tank approximately one inch by loosening the fuel tank strap mounting bolts.
CAUTION
Do not loosen the fuel tank strap mounting bolts more than one inch.
2.
Remove the vapor separator hose where it is connected to the fuel filler pipe vapor separator line.
3.
Disconnect the Fuel Tank Pressure Sensor electrical connector.
4.
Remove the Fuel Tank Pressure Sensor from its mounting bracket, then disconnect the vapor and vent hoses.