Sephia GS Sedan L4-1.8L (1997)
Inspection of EGR Control Valve Wiring (Harness Side)
1. Turn ignition switch ON.
2. Check for battery voltage at terminals, 2 and 5.
3. If voltage is not present, check for an open in the circuit from the engine fuse.
4. Disconnect the EGR Control Valve Connector and check for continuity between the EGR Control Valve (C158) and the PCM (C248).
(C158) Pin# ... (C248) Pin#
1 to 20
2 to 9
4 to 10
6 to 21