Sephia GS Sedan L4-1.8L (1997)
NOTICE
Discard the vent hose after removal.
5.
Disconnect the hoses from the fuel tank rollover valves then remove and discard the vapor hose assembly from the vehicle.
6.
Remove (and keep) the bolt securing the Fuel Tank Pressure Sensor mounting bracket to the crossmember, then remove and discard the mounting
bracket.
7.
Install the new vapor hose assembly by first connecting the hoses to the rollover valves.
NOTICE
It is not necessary to remove the fuel tank to connect the vapor hose harness to the rollover valves.
8.
Install the Fuel Tank Pressure Sensor onto the new mounting bracket.
9.
Connect the new vapor hose to the Fuel Tank Pressure Sensor.
10.
Re-connect the Fuel Tank Pressure Sensor electrical connector.
