Sephia GS Sedan L4-1.8L (1997)
WARNING
Do not connect the ADU connector before installing the ADU securely. The shock of installation or pinching the wiring harness between the
ADU and its mounting points can cause the air bags to deploy, which may cause serious injury.
1. Install the ADU on the four mounting studs. Install the four nuts and torque to specification.
Torque: 8-12 ft-lbs (1-18 N.M)
2. Connect the wiring harness connector(s) to the ADU.
3. Install the front console and its two mounting screws (one each side).
4. Install the rear console and its four mounting screws (two front, two rear).
5. Perform Diagnosis. Refer to Diagnosis (Multi-point) or Diagnosis (Single-point).
