Sephia GS Sedan L4-1.8L (1997)
Specification: 0.28-0.44 inch (7-11 mm)
Stabilizer Bar
1. Position the stabilizer behind the crossmember.
2. Raise the crossmember into place and tighten the six mounting bolts to the specified torque.
Tightening torque: 69-93 ft. lbs. (93-127 Nm)
3. Tighten the two nuts of the steering rack mounting bracket to the specified torque.
Tightening torque: 23-34 ft. lbs. (31-46 Nm)
NOTICE: Tighten the stabilizer bracket bolts to the specified torque before lowering the vehicle. (Unloaded condition).
