Sephia GS Sedan L4-1.8L (1997)
13. Remove the mounting bolt and A/T control cable from the transaxle.
14. Remove the O-ring from the transaxle case.
15. Install the new A/T control cable and a new O-ring into the transaxle.
16. Install the A/T control cable to the throttle cam.
17. Connect the A/T control cable to the throttle lever (throttle body).
NOTICE: Do not reuse bolt 1.
18. Tighten the bolts.
Tightening torque: 69.6 - 94.8 inch lbs. (7.9 - 10.7 Nm)
19. Install the control valve body, refer to CONTROL VALVE BODY.