Sephia GS Sedan L4-1.8L (1997)
Clutch Slave Cylinder: Service and Repair
Overhaul
NOTICE:
-
Clean the disassembled parts in solvent and blow through all ports and passages with compressed air.
-
Before assembly, make sure all parts are completely clean.
-
Apply the specified clutch fluid to the piston and cup assembly and cylinder bore before assembly.
DISASSEMBLY
Piston assembly
1. Disassemble in the order shown.
CAUTION: Hold a rag over the opening of the release cylinder's piston bore to prevent the piston assembly from flying out.