Sephia GS Sedan L4-1.8L (1997)
Differential: Service and Repair
CAUTION: Do not remove the bearing inner race if not necessary.
1. Before disassembly, inspect the backlash of the side gear, Refer to Pre-Inspection.
2. Disassemble in the order shown, Refering to the Disassembly Notes.
3. Inspect all parts and repair or replace as necessary.
4. Assemble in the reverse order of disassembly, Refering to the Assembly Notes.
PRE-INSPECTION
Backlash Of Side Gear And Pinion Gear
Measure the backlash by using the following procedure:
1. Install the left driveshaft and joint shaft into the differential assembly.
