Sephia GS Sedan L4-1.8L (1997)
15.
Pull the door glass run down until the top front corner is aligned with the top front corner of the door window frame.
16.
Push the door glass run onto the forward vertical section of the door window frame up to the top corner.
17.
Reach into the door, and push the door glass run onto the glass guide inboard edge along its entire length.
18.
Insert the top rear corner of the door glass run into the window frame and push the rear edge into place.
NOTICE
Make sure the upper rear corner is fully seated in the door window frame.
19.
Slide the rear bottom portion of the door glass run into the door and push the rear vertical section onto the window frame.
20.
Push the top section of the door glass run onto the door window frame, making sure it fits evenly along its entire length.
21.
Re-install the plastic vapor barrier and door trim panel in reverse order of removal.
22.
Cycle the window up and down several times to ensure smooth/proper operation.
Production Date 7/24/96 to 2/17/97
