Sephia LS L4-1.8L (2001)
Cruise Control Module: Service and Repair
Removal
1. Disconnect battery negative cable.
2. Disconnect cruise control cable from cruise control module.
3. Disconnect control module connector from cruise control module.
4. Remove three nuts securing control module with bracket.
5. Remove control module with bracket from engine compartment.
6. Remove three bolts attaching cruise control module to bracket.
7. Remove control module from bracket.
Installation
1. Position control module on control module bracket.
2. Install three bolts.
Tighten three bolts to 61 - 113 lb.in (7 - 13 N.m, 70 - 130 kg.cm)
