Sephia Sedan L4-1.6L SOHC 16V (1993)
Stabilizer Bar: Service and Repair
Rear Stabilizer Bar
1. Raise and support rear of vehicle, then remove rear wheels.
Fig. 7 Stabilizer Bar Replacement
2. Remove stabilizer in numbered sequence shown, Fig. 7.
3. Reverse procedure to install, noting the following:
a. Align bushing with installation position line painted on stabilizer bar.
b. Tighten stabilizer nuts so 0.43-0.59 inch of thread is exposed at end of bolt.
c. Tighten stabilizer bracket bolts to specifications, after lowering vehicle.
