Sephia Sedan L4-1.6L SOHC 16V (1993)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Fig. 5 Strut Assembly Service
1. Disassemble strut in numbered sequence shown in Fig. 5. Secure mounting block in a vise. Use protective plates in jaws of vise.
2. Loosen piston rod nut a few turns. Do not remove.
3. Compress coil spring with suitable compression tool, then remove piston rod nut.
4. Remove coil spring.
5. Reverse procedure to assemble, noting the following:
a. Secure shock absorber in a vise. Use protective plates in jaws of vise.
b. Apply rubber lubricant to bound stopper and upper spring seat contact surfaces.