Sephia Sedan L4-1.6L SOHC 16V (1993)
Shift Interlock Solenoid: Testing and Inspection
1. Remove front and rear console.
Fig. 12 Park Range Electrical Connector Location
Fig. 15 Shift Lock Actuator Terminal Identification
2. Disconnect electrical connector C307, Fig. 12, when checking continuity between terminal No. 2 on harness side and ground, Fig. 15.
Fig. 16 Shift Lock Actuator Voltage & Continuity Chart
3. Shift selector lever to P range, then check terminal voltages and continuity, referring to voltage and continuity chart, Fig. 16.
4. If results are not as specified in voltage and continuity chart, then repair wire harness or replace shift lock actuator.