Sorento V6-3.5L (2004)
3. Check the cam surface for abnormal wear or damage, and replace if necessary.
4. Check each bearing for damage. If the bearing surface is excessively damaged, replace the cylinder head assembly or camshaft bearing cap, as
necessary.
Camshaft end play: 0.1 - 0.15 mm (0.0039 - 0.0059 inch)
OIL SEAL (CAMSHAFT FRONT)
1. Check the lips for wear. If lip threads are worn out, replace the oil seal with new one.
2. Check a contact surface of oil seal lip on camshaft. If there stratified wear, replace the camshaft.
HLA (HYDRAULIC LASH ADJUSTER)
With the HLA filled with engine oil, hold A and press B by hand. If B moves, replace the HLA.
AUTO LASH ADJUSTER
1. Check auto-lash adjusters for free play by inserting a small wire through the air bleed hole in the rocker arm and push the autolash adjuster
check ball down very lightly.
