Sorento V6-3.5L (2004)
7. Apply a sealant around the edge of the glass.
NOTE: Apply the adhesive within 5 minutes after applying the primer to the glass.
8. Apply a light coat of body primer to the original sealant remaining around the window opening flange. The glass should be installed within 5
minutes after you apply the primer.
9. Using suction cups or the special tool, lower the glass over the opening, align it with the marks made in step 3 and set it down on the sealant.
10. Scrape or wipe excess adhesive off with a putty knife or gauze. Fill all cavities around the windshield glass.
11. Perform a water-leak test for the windshield. Use a cold water spray, being careful not to direct a powerful stream of water on the new adhesive
material. Allow water to spill over the edges of the glass.
12. If there are leaks, dry the affected area, then apply sealant.
13. Install the removed parts.
CAUTION: