Sorento 4WD V6-3.3L (2008)
Turn Signal Lamp: Service and Repair
REMOVAL
TURN SIGNAL LAMP(DOOR MIRROR)
1. Disconnect the negative (-) battery terminal.
2. Remove the tweeter speaker cover (A).
3. Disconnect the door mirror connector (A).
4. Loosen the 3 bolts then remove the door mirror.
CAUTION:
Turn signal lamp of door mirror uses LED (Light-emitting Diode).
INSTALLATION
TURN SIGNAL LAMP(DOOR MIRROR)
1. Reassemble the door mirror to the door.
2. Connect the door mirror connector.
3. Reassemble the tweeter speaker.
