Sorento 4WD V6-3.5L (2011)
6. Once back at the GDS Main Screen select ECU Upgrade from the bottom right-hand corner Next select Auto Mode and then Engine. Perform the
PCM upgrade in accordance with normal GDS tool PCM upgrade procedures
MANUAL MODE PCM UPGRADE PASSWORDS:
7. When the GDS tool reports that the PCM upgrade has been successfully completed click OK turn OFF the ignition key and wait at least 10 seconds
before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS ESC and TPMS Due to CAN BUS multiple DTCs may
be set during reprogramming.
9. Start the engine to confirm proper operation of the vehicle.
AFFECTED PRODUCTION RANGE:
SERVICE ACTION WARRANTY CLAIM INFORMATION:
