Sorento 4WD V6-3.5L (2011)
7. When the GDS tool reports that the ECM upgrade has been successfully completed, click OK, turn OFF the ignition key, and wait at least 10 seconds
before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS, ESC, and TPMS. Due to CAN BUS multiple DTCs may
be set during reprogramming.
9. Start the engine to confirm proper operation of the vehicle.
AFFECTED PRODUCTION RANGE:
2011 Model Year Sorento (XM) with 3.5L produced prior to September 20, 2010.
SERVICE ACTION WARRANTY CLAIM INFORMATION
STANDARD WARRANTY CLAIM INFORMATION:
Use this information only to file a warranty claim for vehicles for which:
1. A customer complains of the same concern.
2. The VIN does not appear on the Affected Vehicles List for Service Action SA075
3. The vehicle model year and production date range are as identified in this bulletin.
*NOTICE
VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
