Engine Controls - MIL ON/DTC P0017 Set on Sorento 4WD V6-35L (2011)
1. Connect the power supply cable to the GDS tool
2. Connect the USB cable between the VCI and the GDS tool
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI
4. Connect the Main 16-pin DLC cable (GHDM - 241000) to the OBD-II connector, located under the drivers side of the instrument panel.
5. With the ignition key ON turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle
using the VIN AUTO DETECT Function.
