Sorento 4WD V6-3.8L (2009)
Bead width : 2.5mm(0.1in.).
CAUTION:
-
Make clean the sealing face before assembling two parts.
-
Remove harmful foreign matters on the sealing face before applying sealant.
-
When applying sealant gasket, sealant must not be protruded into the inside of oil pan.
-
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
C. Install oil pan(A).
Uniformly tighten the bolts in several passes.
Tightening torque
9.80 - 11.76Nm(1.0 - 1.2kgf.m, 7.23 - 8.68lb-ft)
24. Using SST(09231-3C300) install crankshaft damper pulley(A).
Tightening torque
284.2 - 303.8Nm(29.0 - 31.0kgf.m, 209.76 - 224.22lb-ft)
25. Install cylinder head cover.
A. The hardening sealant located on the upper area between timing chain cover and cylinder head should be removed before assembling cylinder
head cover.
B. After applying sealant(TB1217H), it should be assembled within 5 minutes.Bead width : 2.5mm(0.1in.)
