kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Keyless Entry Receiver|Description and Operation|Page 5023 > < Keyless Entry Receiver|Description and Operation
Page 2
background image

4. When the doors UNLOCK switch is on, the ANTI-Theft system is in DISARM mode and the doors are unlocked, however the hazard lamps

do not blink

3. ALARM Function

1. When a point of entry is opened while the Anti-Theft System is in the ARM mode, the hazard lamp and horn alarm will activate (ON/OFF 3

times each) for a period of 27 seconds.

2. Output intervals for the horn alarm and hazard lamps are identical.

3. The alarm sequence, when activated will continue for the duration of the alarm period even when the entry point is closed. (The alarm will

reactivate if entry port is reopened after the initial alarm sequence completes.)

4. New alarm condition during active alarm activation

1. If a new alarm condition occurs during the initial alarm sequence, the start inhibitor will remain on and only the horn alarm will continue.

(The alarm will continue even if the point of entry is closed.)

5. Activating RKE Trunk OPEN during an alarm sequence.

Keyless Entry Receiver|Description and Operation|Page 5023 > < Keyless Entry Receiver|Description and Operation