Spectra L4-2.0L (2004)
Brake Pedal Assy: Adjustments
SERVICE ADJUSTMENT
PROCEDURES
PEDAL HEIGHT
1. Measure the brake pedal height. If the brake pedal height is not within the standard value, adjust as follows.
Standard value: 184 mm (7.24 inch)
2. Disconnect the stop lamp switch connector, loosen the lock nut(A), and move the stop lamp switch to a position where it does not contact the
brake pedal arm.
3. Adjust the brake pedal height by turning the operating rod with pliers (with the operating rod lock nut loosened), until the correct brake pedal
height is obtained.
4. After turning the stop lamp switch(A) until it contacts the brake pedal stopper(B) (just before the brake pedal is caused to move), return the stop
lamp switch 1/2 to 1 turn and secure by tightening the lock nut.
5. Connect the connector of the stop lamp switch.
6. Check that the stop lamp is not illuminated with the brake pedal unpressed.
PEDAL FREE PLAY
