Spectra L4-2.0L (2004)
5) Check whether the clearance between the edge of the adjusting bolt and the push rod of the booster is 0 - 0.1 mm (0 - 0.004 inch). If it is not
standard clearance, loosen the lock nut of the push rod, and turn the push rod to make the adjustment.Standard clearance: 0 - 0.1 mm (0 -
0.004 inch)
5. Install the master cylinder.
6. Connect the vacuum hose to the brake booster.
7. After filling the brake reservoir with brake fluid, bleed the system.
8. Check for fluid leakage.
9. Check and adjust the brake pedal for proper operation.
10. After installing, apply grease to the contact parts of the joint pin and brake pedal.
