Spectra L4-2.0L (2004)
1. Disconnect the double lock connector (A) from the HECU.
2. Disconnect the brake tubes(A) from the HECU.
NOTE:
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid gets on the paint, wash it off immediately with water.
-
Take care not to damage or deform the brake lines during removal and installation.
-
To prevent the brake fluid from flowing, plug and cover the hose ends and joints with a shop towel or equivalent material.
3. Remove the HECU bracket mounting bolt and remove the HECU.
