Spectra L4-2.0L (2004)
WARRANTY CLAIM INFORMATION:
N43 - Slips and shock when up-shifting C40 - Improper adjustment
Service Procedure
*NOTICE
A fully charged battery is necessary before programming can take place, Do NOT connect a battery charger to the vehicle during reprogramming.
Make sure the blower motor and other electrical accessories are OFF during programming
^
All Re-programming must be done with the ignition key in the "ON" position.
^
Be careful not to disconnect any cables connected to the vehicle or Hi Scan Pro during the reprogramming procedure.
^
Do NOT start the engine during reprogramming.
^
Do NOT turn the ignition key "OFF" or interrupt the power supply during reprogramming,
^
When the reprogramming is completed, turn the Ignition key "OFF" and wait 20 seconds before starting the engine.
AUTOMATIC UPDATE PROCEDURE:
1.
Attach the OBD II Data Link Connector (DLC) (20 pins connector) cable to the Hi Scan Pro main body and tighten the two (2) screws securely.