Spectra L4-2.0L (2004)
NOTICE:
The check sheet is shown. When completed, fax to Kia Motors America. KGIS users should download and print the check sheet.
2.
Verify that the male connector of front oxygen sensor is completely inserted into the female connector end record results on the check sheet. If the
connection between the male and female connectors is loose reconnect them completely and clear the related DTCs no further action is required.
3.
Verify that the terminals in the female connector of front oxygen sensor are not pushed back and record results on the check sheet. If required fully
seat and lock any loose terminals into each terminal cavity and clear the related DTCs. If the MIL illumination has been caused by the loose
terminals no further action is required.
