kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 282 > < Diagram Information and Instructions|Page 280
Page 1
background image

Air Bag Control Module: Service and Repair

REMOVAL

1. Disconnect the negative (-) cable from battery and wait for at least three minutes.
2. Remove ignition key from the vehicle.
3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
4. Remove the center console.

5. Disconnect the SRSCM harness connector (A) from the SRSCM (B).

6. Remove the SRSCM mounting bolts (A) from the SRSCM and pull out the SRSCM from the bracket.

Tightening Torque (SRSCM Mounting Bolt) : 8 - 10 Nm (5.9 - 7.4 lb.ft)

INSTALLATION

Diagram Information and Instructions|Page 282 > < Diagram Information and Instructions|Page 280