Spectra L4-2.0L (2004)
2.
Look under the front of the right front seat to access the OCS wire harness connector.
3.
Unplug the OCS wire harness connector and connect the OC-Reprogramming Tool. Connect the OC-Reprogramming Tool to the center console
power outlet.
Note:
Turn the ignition key to the ACC position. DO NOT turn the key to the on position as it will set a stored DTC in the airbag system. Both GREEN
and RED LED's will light up after 1-3 seconds. If the LED's do not power-up, check the power outlet for proper operation.
The same OC-Reprogramming Tool is used for the Sorento and the Spectra. After pressing the start button the tool will communicate with OCS
computer, determine which vehicle it is and perform the proper reflash.
4.
You are now ready to reflash the seat control module. Push the reflash start button on the tool to initiate the communication and reflashing with the
