Spectra L4-2.0L (2004)
Brake Fluid Level Sensor/Switch: Testing and Inspection
BRAKE FLUID LEVEL WARNING SWITCH
1. Remove the connector (A) from the switch located at the brake fluid reservoir.
2. Verify that continuity exists between switch terminals 1 and 2 while pressing the switch (float) down with a rod.
BRAKE FLUID LEVEL WARNING SWITCH / LAMP CIRCUIT
1. Start the engine.
2. Release the parking brake.
3. Remove the connector from the brake fluid level warning switch (A).
4. Ground the connector at the harness side.
5. Verify that the warning lamp lights.
