kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Recall - Seat Occupant Classification System Reflash|Page 902 > < Recall - Seat Occupant Classification System Reflash|Page 900
Page 4
background image

tool.

5.

The GREEN and RED LED lights will toggle back and fourth approximately 60 times during the reprogramming.

a.

After a successful reprogram the GREEN LED will flash 3 quick blinks followed by a steady GREEN light.

b.

If the RED LED flashes 3 quick blinks followed by a steady RED light the programming was unsuccessful:

^

Check the cable connections to the power supply and OCS seat connector.

^

Verify the proper production date on the vehicle.

Note: ONLY vehicles within the affected production date should be reflashed.

6.

After completion of reprogramming, turn the ignition key to the off position, disconnect the OC Reprogramming Tool electrical connection at the

Recall - Seat Occupant Classification System Reflash|Page 902 > < Recall - Seat Occupant Classification System Reflash|Page 900