Spectra L4-2.0L (2004)
3. Using a plastic hammer, install the dust cover.
4. Press - in the hub to the knuckle.
NOTE: Press - in the inner race of the wheel bearing to prevent damage to the bearing assembly.
5. Tighten the hub and the knuckle to the specified torque using the Special Tool (09517-21500).
Specified torque: 200 - 260 Nm (2000 - 2600 kg-cm, 145 - 188 ft. lbs.)
6. Measure the hub bearing starting torque.
Hub bearing starting torque [Limit]: 1.8 Nm (18 kg-cm, 1.3 ft. lbs.) or less
7. If the starting torque is 0 Nm (0 kg-cm, 0 ft. lbs.), measure the hub bearing axial play.
8. If the hub axial play exceeds the limit while the nut is tightened to 200 - 260 Nm (2000 - 2600 kg-cm, 145 - 188 ft. lbs.), the bearing, hub and
knuckle are not installed correctly. Repeat the disassembly and assembly procedure.
Hub bearing axial play [Limit]: 0.008 mm (0.0003 inch) or less
9. Remove the Special Tool.
10. Fix the brake disc with the mounting screws.
INSTALLATION
