Spectra L4-2.0L (2004)
5. Remove the strut lower mounting bolts(A) and then remove the strut assembly(B).
Installation
INSTALLATION
1. Installation is the reverse of the removal procedure.
NOTE: After installation, check the front wheel alignment.
Disassembly
DISASSEMBLY
1. Remove the dust cover(A) with a flat - tipped ( - ) screwdriver(B).
2. Open the dust cover and wipe off grease in the insulator.
3. Using the Special Tool (J38402, A-50), compress the coil spring(A) until there is only a little tension of the spring on the strut.
