Spectra L4-2.0L (2004)
Clutch Disc: Service and Repair
Installation
INSTALLATION
1. Apply multipurpose grease to the spline of the disc.
Grease: CASMOLY L 9508
CAUTION: When installing the clutch, apply grease to each part, but be careful not to apply excessive grease. It can cause clutch slippage and
vibration (shudder).
2. Install the clutch disc assembly to the flywheel using the special tool (09411-25000).
3. Install the clutch cover assembly to the flywheel and temporarily tighten the bolts one or two steps at a time in a star pattern.
Tightening torque
Clutch cover bolt: 15 - 22 Nm (150 - 220 kg cm, 10 - 16 ft. lbs.)
4. Align the bearing (A) to the release fork (B) and then install it to the sleeve of the housing.
CAUTION: Apply multipurpose grease (CASMOLY L9508) to the bearing sleeve and contact point of the release fork.