Spectra L4-2.0L (2004)
1. Remove the clip(B) from drive shaft splines(A) of the transaxle side TJ case(C).
2. Remove both boot bands from the transaxle side TJ case.
3. Pull out the boot from the transaxle side joint (TJ).
4. When separating the joint and boot(A), remove the grease from the TJ case(B).
CAUTION:
-
Be careful not to damage the boot.
-
Make alignment marks on spider roller assembly(A), TJ case(B) and shaft splines(C) to aid reassembly.
