Spectra L4-2.0L (2004)
10. Fix the drive shaft(A) with a vice(B) as illustrated.
11. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is
removed.
12. Separate dynamic damper(A) from the shaft(B) carefully.
13. Remove both bands on the side of wheel.
14. Pull out the joint(BJ) boot on the side of wheel into the transaxle direction. Be careful not to damage the boot.
INSPECTION
1. Check the drive shaft spline for wear or damage.
2. Check that there is no water or foreign material in the BJ.
3. Check the spider assembly for roller rotation, wear or corrosion.
4. Check the groove inside the TJ case for wear or corrosion.
