Spectra L4-2.0L (2004)
NOTE: The following cure times may be critical. Attempting to replace a windshield in ambient temperature over 35 °C (95 °F) should be
avoided before completing the application.
9. Install molding on the glass.
10. Install the glass into the body making sure the glass rests upon the two spacers at the bottom of the windshield.
11. Press glass firmly into place.
NOTE: Lower both front door windows and leave them in that condition until the vehicle can be put back into service. If the vehicle were
completely closed, quickly closing a door could break the seal.
12. Remove excess sealant, if any.
13. Install windshield glass side molding.
14. Perform water leak test immediately.
15. Connect rear window defogger connector.
16. Install package tray.
17. Install rear pillar trim.
