Spectra5 L4-2.0L (2005)
NOTE: Peel door screen off carefully so that it can be reused.
5. Remove door channel.
1. Remove bolts and nuts.
Tightening torque : 8 - 12 Nm (0.8 - 1.2 kg.m, 6 - 9 lb.ft)
2. Remove door channel from door frame.
6. Remove window glass.
1. Connect power window switch connector.
2. Connect negative battery terminal.
3. Turn ignition switch "ON" and set window glass bolts on access hole.
4. Turn ignition switch "OFF".
5. Remove glass run channel from door frame.
NOTE: When install the glass run channel, use soap and water for lubrication.