Spectra GSX L4-1.8L (2000)
"See Power Distribution" (3) means there are more connections here to other circuits shown in the Power Distribution schematic.
Ground symbol (dot and 3 lines) (4) overlapping the component means the housing of the component is grounded to the vehicle frame or to a metal part
connected to the frame.
Component Locations
A component location index follows most schematics. Except for the location of obvious components, like Headlights, the index lists the location of
components, connectors and grounds in the schematic. The index also gives references to component location photographs.
Connector Terminal Identification
The cavities (and wire terminals) in each connector are numbered starting from the upper right looking at the male terminals from the terminal side (or
looking at the female terminals from the wire side. Both views are in the same direction so the numbers are the same). All cavities are numbered, even if
they have no wire terminals in them.
The connector cavity number is listed next to each terminal on the circuit schematic. The cavity/terminal shown is #4.
Fuse Box Details Schematics
