Sportage 2WD L4-2.0L (1997)
1. Install the thrust bearing, thrust washer, O/D one-way clutch outer race, O/D one-way clutch, and O/D one-way clutch retainer.
NOTICE:
-
When installing the thrust washer, ensure that the oil grooves are facing front
-
When installing the one-way clutch to the one-way clutch outer race, the flange of the outer race must face the front
2. Apply clean ATF fluid to the inner and outer piston O-rings, then install them on the piston.
3. Install the clutch piston (spring cap side up), clutch return springs, and clutch return spring retainer.