Sportage 2WD L4-2.0L (1997)
1. Install E-ring(s), secondary valve springs, and the throttle valve.
NOTICE: Install as many E-rings as written down during disassembly. Fluid pressure will vary depending upon the number of E-rings installed.
2. Install the throttle valve primary spring, shiftdown plug, and, with the throttle valve held as shown, install the locating pin.
3. Install the cam spacer, cam return spring, throttle valve cam, washer, and bolt.
Tightening torque: 54 - 78 inch lbs. (6 - 9 Nm)
