Sportage 2WD V6-2.7L (2009)
Hood Latch Release Cable: Service and Repair
REPLACEMENT
HOOD LATCH RELEASE CABLE REPLACEMENT
1. Remove the following items:
A. Hood latch.
B. Hood latch release handle.
2. Using a clip remover, detach the clips from the body, then disconnect the hood latch cable(A) and release cable(B).
NOTE:
-
Take care not to bend the cable.
3. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Replace any damaged clips.