Sportage 2WD V6-2.7L (2009)
Vacuum Brake Booster: Service and Repair
Repair Procedures
Removal
1. Remove the master cylinder.
2. Disconnect the vacuum hose (A) from the brake booster (B).
3. Remove the snap pin (A) and pin (B).
4. Remove the four booster mounting nuts (C).
5. Remove the brake booster (A).
INSTALLATION
1. Adjust push rod length of the booster, and then install the seal on the booster assembly.
Standard length (A): 106 ± 0.5 mm ( 4.173 ± 0.019 in.)