Sportage 2WD V6-2.7L (2009)
Power Steering Line/Hose: Service and Repair
Repair Procedures
REMOVAL
1. Drain the power steering oil.
2. Remove both the pressure tube fitting(A) and the return hose clamp(B) from the gearbox, after lifting the vehicle.
3. Remove the pressure tube connecting bolt(A) and the pressure hose mounting bolt(B), then remove the return hose clamp(C).
4. Remove the pressure tube mounting bolt(A) and the return tube mounting bolt(B).
Tightening torque :
A: 90 - 100 Nm (9 - 10 kgf-m, 65 - 72 lb-ft)
B: 7 - 11 Nm (0.7 - 1.1 kgf-m, 5 - 7.9 lb-ft)
5. Remove the pressure tube bolt(A) and clamp(B), after lowering the vehicle.
6. Remove the pressure tube(A) and the return tube(B).