Sportage 2WD V6-2.7L (2009)
15. Spray undercoating on all the areas that have been sealed
16. Apply sealer to the area around the wheel guard mounting hole (0) to prevent entry of water through the hole Reinstall removed fastener.
17. Attach the Fender Bolt Mounting Tape (P) to the back of the ABS wheel speed sensor bracket (Q); then reinstall the bracket
Repeat the above sealing procedure on the opposite side.
Install removed wheels and torque lug nuts to specifications.
Tightening torque:
90~110 Nm (9~11 Kgf.m 66.4~81.2 lb-ft)
