Sportage 2WD 4Dr L4-2.0L (2000)
Spark Plug: Service and Repair
CAUTION: Do not attempt any maintenance on spark plugs if engine is hot.
Removal
1. Disconnect the negative battery terminal.
2. Carefully remove the high-tension leads.
3. Use compressed air to blow away any dirt or debris from around the spark plug hole.
4. Check that spark plug socket fits squarely on the spark plug and then remove the spark plug.
Installation
1. Install the spark plug into the cylinder head
Tighten spark plug to 11 - 17 lb-ft (15 - 23 N.m).
2. Reconnect the high-tension lead.
3. Reconnect the negative battery cable.