Sportage 4WD L4-2.0L (2005)
Power Window Relay: Testing and Inspection
POWER WINDOW RELAY INSPECTION
1. Remove the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.1 in the I/P-J terminal and No.12 or 13 in the I/P-F terminal when power and ground are connected to
the No.1 in the I/P-J terminal and No. 12 in the I/P-C terminal.
5. There should be no continuity between the No. 1 in the I/P-J terminal and No. 12 or 13 in the I/P-F terminal when power is disconnected.